Boston Simplus Multi-action Rigid Gas Perm Solution 3.5oz

About the Product

Boston SIMPLUS Multi-Action Solution is a sterile solution supplied in a 3.5 FL OZ (105 mL) bottle. It contains poloxamine, hydroxyalkylphosphonate, boric acid, sodium borate, sodium chloride, hydroxypropylmethyl cellulose and Glucam, and is preserved with chlorhexidine gluconate (0.003%) and polyaminopropyl biguanide (0.0005%). It is for cleaning, removing protein, rinsing, disinfecting, conditioning, storing and cushioning fluoro silicone acrylate and silicone acrylate rigid gas permeable contact lenses.

This is a one bottle daily care system for rigid gas permeable lenses: it cleans, removes protein, rinses, disinfects, conditions, stores and cushions the lens, and no separate daily cleaner is required. Lenses soak in it for at least 4 hours or overnight, then in the morning they are rubbed for 20 seconds with 4 drops and rinsed for approximately 5 seconds with a steady stream of the solution before they are inserted. It is not for use with soft (hydrophilic) contact lenses, and for lens rewetting and lubrication Boston Rewetting Drops is used instead.

Materials

• Chlorhexidine gluconate, 0.003% and polyaminopropyl biguanide, 0.0005% The preservatives in the formula.

Full Ingredient List

Contains poloxamine, hydroxyalkylphosphonate, boric acid, sodium borate, sodium chloride, hydroxypropylmethyl cellulose, and Glucam; preserved with chlorhexidine gluconate (0.003%) and polyaminopropyl biguanide (0.0005%).

Specifications

1oz

3.5oz

How to Use

To ensure proper disinfecting, all steps listed below must be followed:

1. Wash your hands with mild soap. (Caution - pump soaps may contain oil-based suspension agents.)
2. Place lenses in empty lens case and fill to top ridges with fresh Boston SIMPLUS Multi-Action Solution. Soak lenses for at least 4 hours (or overnight) before wearing.
3. Wash hands with mild soap before cleaning (rubbing) lenses. After soaking, remove lenses from lens case and rub both sides of the lenses carefully with 4 drops of Boston SIMPLUS Multi-Action Solution in the palm of your hand for 20 seconds. NO SEPARATE DAILY CLEANER IS REQUIRED.
4. Rinse for approximately 5 seconds with a steady stream of Boston SIMPLUS Multi-Action Solution to eliminate loosened surface deposits and insert lenses.
5. Discard solution from lens case after each use.

For lens rewetting and lubrication, use Boston® Rewetting Drops.

Warnings

Do not use this solution if you are allergic to any ingredient in this product.

Not For Use With Soft (Hydrophilic) Contact Lenses.

NOT for direct eye use.

DO NOT fill the bowl of your scleral lens with this solution.

To avoid contamination, never touch dropper tip of the container with your hands or to any surface. Keep bottle tightly closed when not in use.

Contact lenses and solutions, if not handled properly, can become contaminated by common bacteria known to cause ocular infections. Serious damage to the eye and loss of vision may result from using contaminated solutions or from wearing contaminated or damaged contact lenses.

PROBLEMS WITH CONTACT LENSES AND LENS CARE PRODUCTS COULD RESULT IN SERIOUS INJURY TO YOUR EYES. It is essential that you follow your eye care practitioner's directions and all labeling instructions for proper use of your lenses and lens care products, including the lens case.

Eye problems, including corneal ulcers, can develop rapidly and lead to loss of vision. Daily wear lenses are not indicated for overnight wear and should not be worn while sleeping. Clinical studies have shown that the risk of serious adverse reactions is increased when these lenses are worn overnight. Extended wear lenses should be regularly removed for cleaning and disinfection or for disposal and replacement on the schedule prescribed by your eye care practitioner. Clinical studies have shown that there is an increased incidence of serious adverse reactions in extended wear contact lens users as compared to daily wear contact lens users. Studies have also shown that the risk of serious adverse reactions increases the longer extended wear lenses are worn before removal for cleaning and disinfection or for disposal and replacement. Studies have also shown that smokers have a higher incidence of adverse reactions. Therefore if you experience eye discomfort, excessive tearing, vision changes or redness of the eye, immediately remove your lenses and promptly contact your eye care practitioner. It is recommended that contact lens wearers see their eye care practitioner twice each year or, if directed, more frequently.

• Failure to discard solution from lens case after each use, "topping-off" solution or use of water to care for your lenses may lead to contamination resulting in eye injury and potential loss of vision.
• You should follow the complete recommended lens rubbing and rinsing times in the product labeling to adequately disinfect your lenses and reduce the risk of contact lens contamination. Reduced rubbing or rinsing time may not adequately clean your lenses.
• Never use water, saline solution, or rewetting drops to disinfect your lenses. These solutions will not disinfect your lenses. Not using the recommended disinfectant can lead to severe infection, vision loss or blindness.
• Do not store your lenses or rinse your lens case with water or any non-sterile solution. Only use fresh solution so you do not contaminate your lenses or lens case. Use of non-sterile solution can lead to severe infection, vision loss or blindness.
• Using your solution beyond the discard date could result in contamination of the solution and can lead to severe infection, vision loss or blindness.

Storage

Store solutions at room temperature. Do not freeze. Discard any remaining solution within 90 days after opening.